Soiled Dish Breakdown Cart with 2 Flat, 2 Angled 28 x 46-in. Shelves, 1,000-Lb. Capacity

$11,139.00

Lakeside’s innovative breakdown cart saves labor and reduces breakage by presorting soiled dishes close to the point of service. The Lakeside B592 has 2 flat and 2 angled shelves featuring side and back rails to securely hold bus tubs with a 1,000-lb weight capacity. The B592 angled shelves are pitched at 20° for easy access to reach and organize glass/cup racks. The angled shelves also feature a drain system with a clear plastic drain tube to avoid wet floors and accidents. This model has tubular push handles on both sides allow pushing or pulling from either end to better navigate confined areas. The 14 gauge shelves give extra strength to support heavy dishes and the all-welded U-shape construction provides a stronger structure and easier-to-clean surface. This unit has marine guard front edges on flat shelves to prevent drippage. Large 8” No-Mark® casters make it smooth and easy to transport the cart to the dishwashing area or away from the wall to clean. Slides below the bottom shelf accommodate a 12” x 20” x 2” drain pan.* This cart’s built-in food scraper with plastic hanging waste bins clean mess quickly and easily. Made in the USA.

Specifications

PRODUCT INFORMATION
country-of-origin

US

Shelf Size (in)

28 in x 46 in

Country of Origin

US

Number of Shelves

4

Angled Shelves

2

Material

Stainless Steel

Shelf Edges

3 Edges Up

Shelf Clearance (in)

14

Caster Size (in)

8

Caster Type

2 Ea. Fixed, 2 Ea. Swivel, Extra-Load, No-Mark Polyurethane

Item Length x Width x Height (in) 51.88 in x 30.88 in x 69.25 in
Specification Sheet View the B592 specification sheet
SHIPPING DIMENSIONS
Weight 258 lbs 117.03 kgs
Dimensions (LxWxH) 57 in x 38.5 in x 75.5 in 144.78 cm x 97.79 x cm 191.77 cm
Print Friendly, PDF & Email

Specification

Unit is all-welded stainless steel, with U-frame leg construction. Shelves are 14-gauge, and are continuously bead welded to 1/8” thick angled legs. Shelves are configured in a combination of flat and slanted positions to accommodate trays, pans, dishes (flat) and glass/cup racks (slanted). Flat shelves feature marine front edge to prevent drippage, and edges turned up 4” on back and sides. Slanted shelves are pitched at 20º, and have a drain hole with drain hose to divert drippage from glass/cup racks. Hose drains into a 12” x 20” pan (not included) inserted on slides under the bottom shelf. A full-perimeter bumper is mounted to frame bottom. An optional (included on models B591, B592, and B593) rubber plate scraper is mounted to unit side, and is removable for cleaning. Unit has six each extra-load plate type casters, two fixed center and four swivel, two each with brake (Model B591 has two each swivel and two each fixed casters), fastened to stainless steel channel crossmembers. Swivel casters have shielded ball bearing races and zerk fittings for lubrication of swivel bearings. Caster wheels are 8” (203 mm) diameter with 2” wide, non-marking tread. Unit is NSF listed.

  • 2 Flat shelves feature side and back rails to securely hold bus tubs and silverware containers and prevent spills.
  • 2 Angled shelves pitched at 20° to easily reach and organize glass/cup racks.
  • Angled shelves also feature a drain system with a clear plastic drain tube to avoid wet floors and accidents.
  • Built-in food scraper with plastic hanging waste bin clean mess quickly and easily.
  • Tubular push handles on both sides allow pushing or pulling from either end to better navigate confined areas.
  • 14 gauge shelves are extra strength to support heavy dishes.
  • All-welded U-shape construction for a stronger structure and easier-to clean surface.
  • Marine guard front edges on flat shelves prevent drippage.
  • Large 8” No-Mark® casters make it smooth and easy to transport cart to the dishwashing area or away from wall to clean.
  • Slides below bottom shelf accommodate a 12” x 20” x 2” drain pan.*